GB 11622-1989 船用高压横粱顶杆式叶片马达
| 标准名称： | 船用高压横粱顶杆式叶片马达 |
| 中标分类： | 船舶 >> 船舶管路附件 >> 船用液压、气动元件及附件 |
| 替代情况： | 调整为CB/T 3835-1999 |
| 发布日期： | |
| 实施日期： | 1990-04-01 |
| 首发日期： | |
| 作废日期： | |
| 出版日期： | |
| 页数： | 19页 |
没有内容
没有内容
没有内容
没有内容
| 标准名称： | 通用门式起重机 |
| 英文名称： | General purpose gantry cranes |
| 中标分类： | 机械 >> 通用机械与设备 >> 起重机械 |
| ICS分类： | 材料储运设备 >> 起重设备 >> 起重机 |
| 替代情况： | JB 3186-1982;被GB/T 14406-2011代替 |
| 发布部门： | 国家技术监督局 |
| 发布日期： | 1993-04-20 |
| 实施日期： | 1994-01-01 |
| 首发日期： | 1993-04-20 |
| 作废日期： | 2011-12-01 |
| 主管部门： | 中国机械工业联合会 |
| 提出单位： | 中华人民共和国机械电子工业部 |
| 归口单位： | 全国起重机械标准化技术委员会 |
| 起草单位： | 大连起重机器厂 |
| 出版社： | 中国标准出版社 |
| 出版日期： | 1900-01-01 |
| 页数： | 24页 |
本标准规定了通用门式起重机分类、技术要求、试验方法及检测规则等内容。本标准适用于露天作业的通用门式起重机，其取物装置为吊钩、抓斗或电磁吸盘(起重电磁铁)，或同时用其中二种或三种。专用门式起重机中相同和类似部分亦可参照使用。
没有内容
没有内容
没有内容
MIL-HDBK-17-2E (VOL. 2 OF 3), DEPARTMENT OF DEFENSE HANDBOOK: COMPOSITE MATERIALS HANDBOOK - POLYMER MATRIX COMPOSITES MATERIALS PROPERTIES (23 JAN 1997)., This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This mandate is a DoD requirement only; it is not applicable to the Federal Aviation Administration (FAA) or other government agencies. The purpose of this handbook is to provide a standard source of statistically-based mechanical property data for current and emerging composite materials. Strength and strain-to-failure properties will be reported either in terms of B-values or S-values. A B-basis value is the mechanical property value above which at least 90 percent of the population is expected to fall, with a confidence of 95 percent. An S-basis value is the mechanical property value which is usually the specified minimum value of the appropriate government specification for the material. Physical, chemical, and mechanical values of the composite constituents - the fibers, matrix material, and prepreg - will be reported where applicable. Later chapters will include data summaries for the various composite systems. Individual chapters focus on particular reinforcement fibers. Statistically-based strength properties will be defined for each composite material system over a range of potential usage conditions. The intent will be to provide data at the upper and lower limits of the potential environmental conditions for a particular material, so that application issues do not govern the mechanical property characterizations. If data are also available at intermediate environmental condi- tions, they will also be used to more exactly define the relationship between the material properties and the effect of the environment on those properties. The statistically-based strength data which are avail- able are tabulated in Volume 2. These data are useful as a starting point for establishing structural design allowables when stress and strength analysis capabilities permit lamina level margin of safety checks. Depending on the application, some structural design allowables will have to be determined empirically at the laminate and composite level, since MIL-HDBK-17 does not provide these data. Additional information and properties will be added as they become available and are demonstrated to meet the guideline criteria. All data included herein are based on test specimens only. Test specimen dimensions conform with those specified for the particular test method which is used. Standard test methods are recommended where possible (ASTM standards are the primary source). The designer and all users must be responsible for any translation of the data contained herein to other coupon dimensions, temperature, humidity, and other environmental conditions not covered in this document. Problems such as scale-up effects and the influence of the test method selected on properties are also not addressed in this document. The manner in which S-basis values are used is also up to the discretion of the designer. In general, decisions concerning which properties to use for a specific application or design are the responsibility of the designer and are outside the scope of this handbook.